Skip to content
IDAHO
CATTLE GUARDS

Load classes

Heavy duty and highway-rated cattle guards

If the crossing carries the public, you need a highway-rated guard - and the rating has to come from the manufacturer's certificate for that exact product, not from the words “heavy duty” in a listing. On a private ranch road you usually do not need one, and buying one anyway costs you money in steel, excavation and base.

Cattle guard load classesFour load classes as bars of increasing length: ATV and UTV crossings, private and ranch use, heavy ranch and farm equipment, and highway rated. Only a highway rating is accepted on a public road.ATV / UTV CROSSINGPRIVATE / RANCH USEHEAVY RANCH + FARM EQUIPMENTHIGHWAY RATEDAXLE LOAD AND USE INTENSITY →PUBLIC ROADS
A public road needs a highway rating, and only the manufacturer can certify one. We send you the certificate with the quote.

The four classes, plainly

ClassDesign casePublic road?
ATV / UTVSide-by-sides, quads, foot trafficNo
Private / ranchPickups, stock trailers, light equipmentNo
Heavy ranchLoaded trucks, tractors, swathers, feed trucksUsually not accepted
Highway ratedPublic traffic, semis, emergency vehiclesYes

Class names describe use. The rated figures behind them belong to a specific product and arrive with its certificate.

What a load rating assumes

Bearing
That the frame bears on undisturbed or properly compacted ground, or on abutments built to spec.
Span
That the clear span is what the drawing says. Widening the opening on site changes the structure.
Condition
That the pit drains. A guard sitting in water does not stay the thing that was rated.
Documentation
That there is a document. No document, no rating - only a description.

The base is part of the rating

This is the part that goes wrong quietly. A rated guard dropped onto soft fill is no longer a rated structure - it is the same steel in a different situation, and it will tell you so by settling at one end. On a highway-rated install the base is usually concrete abutments, because that is the bearing condition the rating assumes.

It is also why we will not quote a highway-rated install from a phone call alone. We look at the ground first.

How the install goes, step by step

Gravel base compared with concrete abutmentsTwo sections side by side. On the left, a boxed guard set on compacted gravel with a shallower excavation. On the right, a guard set on poured concrete abutments with a deeper excavation and more room for cleanout.Gravel baseCOMPACTED GRAVELSHALLOWER DIGConcrete abutmentsPOURED ABUTMENTSDEEPER DIGSCHEMATIC - DEPTHS PER SITE AND SPEC
Which base you need depends on the ground and the load class, and it is settled at the site review - not from a catalogue.

“Heavy duty” is a marketing word

Searching for a heavy duty cattle guard turns up listings where the phrase does the work a document should. Heavier steel, more rails and a deeper frame all help, and none of them is a rating. The questions worth asking any seller, including us:

  • What is the rated loading, and what standard is that stated against?
  • Can I see the document that states it, for this product?
  • What bearing condition does the rating assume?
  • What is the rail size and spacing, and the clear span?

Those four answers tell you more than any product name.Reading a spec sheet.

Questions we get asked

What does HS-20 mean?
HS-20 is a highway design loading used for bridge and structure design in the United States. When a manufacturer states a cattle guard is rated to it, that rating belongs to a specific product, tested or engineered under stated assumptions about how it is supported. It is not a property of "steel cattle guards" in general, and it only holds if the guard is installed the way the rating assumes.
Do I need a highway rating for a ranch road?
Usually not. A private ranch road carrying your own equipment is a different design case from a county road carrying the public and a school bus. The road authority decides what it will accept on a public road, which is one of the first questions we ask.
Who certifies the rating?
The manufacturer. We are not a manufacturer and we do not certify load ratings - we pass on the document that does. If a seller will not give you the certificate, treat the rating as unverified.
Does the base affect the rating?
Yes, and this is the part most often missed. A rating assumes a bearing condition. Set a rated guard on soft or disturbed ground and you no longer have the structure the rating describes, whatever the sticker says.
Is a heavier guard always better?
No. An over-rated guard costs more, needs a bigger excavation and a heavier base, and takes equipment to place. The right answer is the class that covers the heaviest thing that actually crosses, with the base to match.
Get my free quote