Skip to content
IDAHO
CATTLE GUARDS

Questions

Cattle guard questions, answered

The questions we get on the phone most weeks: what width, what rating, whose permission, what it costs, whether stock will cross it, and whether horses can use one. Short answers here, with the detail linked.

Cattle guard load classesFour load classes as bars of increasing length: ATV and UTV crossings, private and ranch use, heavy ranch and farm equipment, and highway rated. Only a highway rating is accepted on a public road.ATV / UTV CROSSINGPRIVATE / RANCH USEHEAVY RANCH + FARM EQUIPMENTHIGHWAY RATEDAXLE LOAD AND USE INTENSITY →PUBLIC ROADS
A public road needs a highway rating, and only the manufacturer can certify one. We send you the certificate with the quote.

Two answers up front

Most questions come down to one of these two drawings. The ladder is which load class you are in - only the top one is accepted on a public road. The one below it is why cleanout matters: a cattle guard works because an animal sees depth, and a silted pit has none.

Sizing and specification

What width cattle guard do I need?
Measure the travelled surface at its widest point and order wider than that. Most Idaho ranch roads land on 16 ft; rural driveways are often 12 or 14 ft. Sizes and widths.
How do I know what load class to buy?
Size for the heaviest thing that crosses, not the average. Public roads need a highway rating. Load classes explained.
Do I need wings?
If anything turns in at an angle, or the fence meets the road at anything other than a right angle, yes. What wings do.
Flat rail or pipe rail?
Flat bar is easier on tyres and holds mud; pipe sheds mud and snow and is less sure underfoot. Rail spacing matters more than either, and spacing is a manufacturer figure. Reading a spec sheet.

Livestock, horses and wildlife

Do cattle actually cross cattle guards?
A properly specified and maintained cattle guard deters cattle because the animal sees depth under the rails and declines to step into it. Two things break that: a pit silted up to the point there is no visible depth, and an animal under enough pressure - from a dog, a vehicle or lack of water - to try anyway. Keep it clean and keep the gate as the way through.
Are cattle guards safe for horses?
Treat a standard cattle guard as unsuitable for horse traffic. A hoof can go through the rails, and the injuries are severe. Use a gate for horses unless a manufacturer documents a design specifically intended for them - and we will not describe any product as safe for horses without that document.
Will it hold sheep or goats?
Less reliably than cattle. Smaller, more agile stock are more likely to find a way across, and spacing designed for cattle is not spacing designed for them. Tell us what you are containing before we size anything.
What about deer?
A cattle guard is not a deer deterrent. Deer jump. Products marketed as deer guards are a different thing with different claims behind them, and we would rather tell you that than sell you a crossing that will not do what you hoped.

Buying, delivery and installation

What does a cattle guard cost?
Width, load class, wings and base type decide most of it, then the ground decides the rest. What moves the price.
Can I buy just the cattle guard?
Yes. Local pickup or delivery inside our service area. We recommend professional installation for anything rated for road use, because a load rating assumes a bearing condition someone has to build.
Do you ship cattle guards?
Not at the moment. Supply-only orders are pickup or delivery within our service area - a cattle guard is a heavy, awkward freight item and we would rather not pretend otherwise.
Do you sell used cattle guards?
No. If you are looking at a used one, the questions that matter are whether its load rating is documented (usually it is not), whether the frame is straight, how much section has been lost to corrosion, and whether the rail spacing suits your stock. An undocumented rating on a public road is not a saving.
How long does delivery take?
Product lead time depends on what the manufacturer has available, so we confirm it with the quote rather than guessing. On a public-road crossing the approval usually sets the schedule anyway.
How do I get a quote?
Tell us the opening width, what crosses it, and whether the road is public or private. Photos from 20 ft back help a lot. Get a quote.

Permissions and Idaho rules

Do I need permission to put in a cattle guard?
On a public road, yes - from the county, the highway district or whichever body governs that road, under Idaho Code 40-2310. There is also a gate requirement. On a private drive you generally do not, though HOA and easement rules can apply. The rules, cited.
What is the gate requirement?
A gate not less than 12 ft long in the connected fence, not more than 33 ft from the highway, unlocked at all times. Gates.
What if my access is onto a state highway?
Idaho Code 40-2310 excludes highways maintained by the Idaho Transportation Department. Those go through ITD’s right-of-way encroachment process instead.
Can you get the approval for me?
We help you through the steps and we will tell you who to talk to. We cannot promise an approval, and we will not pretend to - the decision belongs to the road authority.
Cleanout: a clear pit against a silted oneTwo sections. On the left, a clear pit under the rails with visible depth and drainage. On the right, the same guard with the pit filled with silt, so the rails sit on fill and stock can see a solid surface.ClearVISIBLE DEPTHDRAINS AND DRIESSilted upNO DEPTH TO SEEHOLDS WATER, LIFTS IN FROSTCLEANOUT ACCESS IS PART OF THE INSTALL, NOT AN EXTRA
A cattle guard works because stock can see depth. Once the pit fills, it is a bridge - which is why the install leaves a way to get the silt out.

Maintenance and problems

How much maintenance does a cattle guard need?
Cleanout, and that is mostly it. Check the pit each season and clear it before the silt reaches the rails. A silted guard stops deterring stock and starts holding water, which is how frost lifts a frame.
Why is my cattle guard sitting unevenly?
Usually the base. A frame that was set on fill, or on ground that was never properly compacted, settles at one end. It is a fixable problem and a much cheaper one to avoid - which is why the base is most of what the install is.
Can a cattle guard be moved?
A steel guard, usually yes - it is a lift and a new base. Cast-in-place concrete, no. Precast is possible and expensive.
Get my free quote